NEW 5 Axis Milling Machine 

Emco MAXXMILL 500

MAXXMILL 500 is the ideal vertical machining center for 5-axis machining of lots of small-medium size. 

It is the perfect machine for the production third account, for the automotive industry, for general mechanics and also for the advanced training centers. 

The new MAXXMILL 500 can work with pieces of real working range of 500 x 500 x 475 mm on 5 sides in one position.
- Base of the machine and X axis slide welded steel
- Mechanical spindles with direct drive: 10000 rev / min - Motor spindle: 15000 rpm / min
- Tool magazine with 30 (40) positions
- Swiveling rotary table
-available With Heidenhain or Siemens control - adjustable and revolving control panel
- The chip removal is possible through the installation of a chip conveyor slat.
An exhaust system of automatic chip is standard in the base of the machine.

[Machine housing]

With a pivoting movement of +/- 100 °, the B axis provides a larger working area than the others on the market. The C axis can be continuously rotated (360 °).
The tool magazine is equipped with 30 seats (40 in option). The tool selection method is of the random type. This means that the tools are always deposited in the first free space, reducing the time.
The tilt rotary table has a wide locking surface equal to 600 x 600 mm and can withstand loads to a maximum weight of 250 kg loadable uniformly distributed.
You can then easily work pieces of dimensions up to 500 x 500 x 475 mm.
The original design concept of the new MAXXMILL 500 is typically moving column. The machine's base is steel welded with full complement polymer concrete, excellent material from vibration. The X-axis slide is welded steel, while the slides of the Y and Z axes are stabilized cast iron.

With a pivoting movement of +/- 100 °, the B axis provides a larger working area than the others on the market. The C axis can be continuously rotated (360 °).
The tool magazine is equipped with 30 seats (40 in option). The tool selection method is of the random type. This means that the tools are always deposited in the first free space, reducing the time.
The tilt rotary table has a wide locking surface equal to 600 x 600 mm and can withstand loads to a maximum weight of 250 kg loadable uniformly distributed.
You can then easily work pieces of dimensions up to 500 x 500 x 475 mm.
The original design concept of the new MAXXMILL 500 is typically moving column. The machine's base is steel welded with full complement polymer concrete, excellent material from vibration. The X-axis slide is welded steel, while the slides of the Y and Z axes are stabilized cast iron.